MILITARY AIRCRAFT TYRES – Monitoring of Operating Conditions

The application of MEMS technologies developed from the Department of the Polytechnic, with this research, has been directed toward an area not yet sensorized like that of a tire for military aircraft. Theaereo2 wheels of the main landing gear of an aircraft military jet are characterized by a peculiar phenomenon of heating of the tires generated by severe operational conditions of employment/taxiing, takeoff, landing phases and  emergencies during operations.

Structural Loads cyclically deform the tyre carcass. and induccarrelloe a deformation work in the various layers of materials, linked by the rubber compound, that make up the structure of the tire, the internal work of deformation and the heat of the use of the brakes raises the internal temperature of the carcass but even more in that salient structural area called Bead Toe / Tyre bead.

The temperatures of the brakes package can exceed easily 500 ° C in a normal braking and would reach 1000 ° C in case of aborted take-off or emergency landing. In extreme conditions the temperature may be such as to cause local failure of the rubber compound in the area of Tire Bead/Beadpneumatico Toe. This local failure is due to the loss of structural capability of the rubber because the local compound temperature. Therefore the  structural collapse starts when the bond between the carcass and steel cable is loosening. This phenomenon, not measurable on the outer tire surface, is hidden due to the poor heat conductivity of the rubber of the structure of the tire. Hence the need for a dedicated MEMS Sensor System that is able, using the salient physical parameters affecting the structural integrity of tire bead, carry out:

  • monitor taxiing / take-off / landing over the entire operating cycle of an aircraft
  • store the operating history in terms of the significant parameters.

The research has enabled us to develop a device insertedsensore into the tire, able to monitor and collect data on thermal conditions and wear of the tire in real time. The system has been realized through the development of MEMS sensors integrated into the tire itself, by monitoring the operating environment conditions (temperature, pressure, loading conditions).test

Level reached by the current state of research is TRL 5.

The next steps of the research are directed to the engineering of a final optimized solution to be installed as “stand-alone” for an initial operational test of the entire system on an aircraft for ground trials.

This program was delivered to Italian MoD with collaboration of Politecnico di Torino – Department of Applied Science and Technology